Switches

Reset table

Rows: 0

Switches — IC Selection Table & Specifications

Part NumberDescription & Key SpecificationsPackage / FeaturesDatasheet
ET2102The ET2102 is a high-performance configurable dual-voltage-supply translator for bi-directional voltage translation over a wide range of inpBi-Directional interface between any two levels from 1.65V to 5.5VPDF
ET2104The ET2104 is a high-performance configurable dual-voltage-supply translator for bi-directional voltage translation over a wide range of inpBi-Directional Interface between Any Two Levels:1.65V to 5.5V|PDF
ET3157The ET3157 is an advanced CMOS analog switch fabricated with silicon gate CMOS technology. It achieves very low propagation delay and RDSONPDF
ET32123ET32123 is a high voltage, wide range positive and negative signal passing, single-pole/single-throw (SPST) analog switch that is designed FCDFN-6 (1.2mm×1.5mm)Specs
ET324ET324 is low cost, voltage feedback amplifiers...Low offset voltage: ±4.5 mV (MAX)Specs
ET3328The ET3328 is an advanced CMOS analog switch with POGO OVP function fabricated in Sub-micron silicon gate CMOS technology. VCC=Max(VCC1,POGOQFN14L (1.8mm×1.4mm)Specs
ET3550ET3550 is a high-performance 4PST, normally closed depletion type isolation switch. Depletion technology allows devices to conduct signals 4PST (NC)Specs
ET358M/U/Y1ET358 is low cost, voltage feedback amplifiers. The device can operate from 2.1V to 5.5V single supply, while consuming only 60μA quiescent Low offset voltage: ±4.5 mV (MAX)PDF
ET3712A30ADNLSThe ET3712A30ADNLS is a high sensitivity and high-accuracy Omnipolar detection Hall effect switch IC that operates at a low voltage and low SOT23-3Specs
ET3712A30ADNLTThe ET3712A30ADNLT is a high sensitivity and high-accuracy Omnipolar detection Hall effect switch IC that operates at a low voltage and low Pole detection: Omnipolar poleSpecs
ET3712A30BDCLDThe ET3712A30BDCLD is a high sensitivity and high-accuracy Omnipolar detection Hall effect switch IC that operates at a low voltage and low DFN4(1.2×1.6)Specs
ET3712A30BDCLHThe ET3712A30BDCLH is a high sensitivity and high-accuracy Omnipolar detection Hall effect switch IC that operates at a low voltage and low SOT-553Specs
ET3712A30BDCLSThe ET3712A30BDCLS is a high sensitivity and high-accuracy Omnipolar detection Hall effect switch IC that operates at a low voltage and low SOT23-3Specs
ET3712A30BNCLDThe ET3712A30BNCLD is a high sensitivity and high-accuracy N pole detection Hall effect switch IC that operates at a low voltage and low curDFN4(1.2×1.6)Specs
ET3712A30BNCLHThe ET3712A30BNCLH is a high sensitivity and high-accuracy N pole detection Hall effect switch IC that operates at a low voltage and low curSOT-553Specs
ET3712A30BNCLSThe ET3712A30BNCLS is a high sensitivity and high-accuracy N pole detection Hall effect switch IC that operates at a low voltage and low curSOT23-3Specs
ET3712A30BSCLEThe ET3712A Series are a high sensitivity and high-accuracy Hall effect switch IC that operates at a low voltage and low current consumptionPole detection: Detection of Omnipolar, S pole or N poleSpecs
ET3712A30CDCLGThe ET3712A Series are a high sensitivity and high-accuracy Hall effect switch IC that operates at a low voltage and low current consumptionPole detection: Detection of Omnipolar, S pole or N polePDF
ET3712A45BDCLSThe ET3712A Series are a high sensitivity and high-accuracy Hall effect switch IC that operates at a low voltage and low current consumptionPole detection: Detection of Omnipolar, S pole or N poleSpecs
ET3712A45BNCLHLow Voltage N-Pole Detection Type Hall Effect Switch ICSOT553Specs
ET3712A45BSCLDThe ET3712A Series are a high sensitivity and high-accuracy Hall effect switch IC that operates at a low voltage and low current consumptionPole detection: Detection of Omnipolar, S pole or N poleSpecs
ET3712A70The ET3712A70 is a high sensitivity and high-accuracy Omnipolar Hall effect switch IC that operates at a low voltage and low current consumpPole detection:Omnipolar poleSpecs
ET3713The ET3713 is a high sensitivity and high-accuracy Omnipolar Hall effect switch IC that operates at a low voltage and low current consumptioPole detection:Omnipolar polePDF
ET3713B30The ET3713B30 is a high sensitivity and high-accuracy Omnipolar Hall effect switch IC that operates at a low voltage and low current consumpPole detection:Omnipolar polePDF
ET3715A30The ET3715A30 is a high sensitivity and high-accuracy Omnipolar Hall effect switch IC that operates at an ultra-low voltage and low current Pole detection:Omnipolar polePDF
ET3716The ET3716 is a high sensitivity and high-accuracy polar selectable Hall effect switch IC that operates at a low voltage and low current conPole detection:Polar selectablePDF
ET3718A30DCSThe ET3718A Series is produced with CMOS technology, which internally includes high sensitivity horizontal hall plates, sleep/awake logics fCMOS TechnologySpecs
ET3718A35SCDThe ET3718A Series is produced with CMOS technology, which internally includes high sensitivity horizontal hall plates, sleep/awake logics fCMOS TechnologySpecs
ET3718A35SCEThe ET3718A35SCE is produced with CMOS technology, which internally includes high sensitivity horizontal hall plates, sleep/awake logics forCMOS TechnologySpecs
ET3720The ET3720 is a single-phase full-wave motor driver. It is built in an ultra small WL-CSP4 package. With built in HALL sensor, it is possiblWLCSP4PDF
ET3725A30The ET3725A30 is a high sensitivity and high-accuracy Omnipolar Hall effect switch IC that operates at an ultra-low voltage and low current Pole detection:Omnipolar polePDF
ET3725B30Ultra-Low Voltage Operation Omnipolar Detection Type Hall Effect Switch ICDFN4(1.0mm×1.0mm)Specs
ET3856The ET3856 is a high-speed CMOS low voltage dual analog SP3T (Single Pole Triple Throw) switch or Dual 3:1 Multiplexer/Demultiplexer Switch Ultra Low Power Dissipation: --ICC = 0.2μA (MAX.) @ TA = 85°CPDF
ET3895The ET3895 low power voltage detector provides monitoring of battery, power-supply, and regulated system voltages. The devices is a very smaPDF
ET3895B27TThe ET3895B27T low power voltage detector provides monitoring of battery, power-supply, and regulated system voltages. The devices is a verSpecs
ET3896The ET3896 low power voltage detector provides monitoring of battery, power-supply, and regulated system voltages. The devices is a very smaAdjustable Threshold Down to 500mVPDF
ET44599The ET44599 is a dual-independent double-pole/double-throw (DPDT), TTL/CMOS compatible analog switch. It operates from a 1.8V to 5.5V singlSpecs
ET4557The ET4557 device is built for interfacing a SIM card with a single low-voltage 1.08V to 1.98V host side interface. The ET4557 contains threSupports clock speed up to 10MHz clockPDF
ET4559The ET4559 device is built for interfacing a SIM card with a single low-voltage 1.08V to 1.98V host side interface. The ET4559 contains threSupports clock speed up to 10MHz clockPDF
ET4857SD3.0-SDR104 Compliant Integrated Auto-direction Control Memory Card Voltage Level TranslatorWLCSP20 (0.4pitch)PDF
ET4860The ET4860 is a SD 3.0-compliant bidirectional dual voltage level translator with auto-direction control. It is designed to interface betweeWLCSP16 (1.38mm × 1.38mm)Specs
ET5014The ET5014 is a 4-bit bidirectional level translator in which the input and output ports are switched automatically without direction controWide VCC, VL Operating Range: 1.2V to 5.0VPDF
ET5014AMThe ET5014AM is a 4-bit bidirectional level translator in which the input and output ports are switched automatically without direction contWide VCC, VL Operating Range: 1.1V to 5.0VPDF
ET5014LThe ET5014L is a 4-bit bidirectional level translator in which the input and output ports are switched automatically without direction contrWide VCC, VL Operating Range: 1.08V to 5.0VPDF
ET5223The ET5223 is an advanced CMOS analog switch fabricated in Sub-micron silicon gate CMOS technology. The part also features guaranteed Break Ultra-low RON≤0.5Ω @ VCC =4.3VPDF
ET5224YThe ET5224Y is an advanced CMOS analog switch fabricated in Sub-micron silicon gate CMOS technology. The part also features guaranteed BreakSingle Supply Operation from 1.8 to 5.5 VPDF
ET5228The ET5228 is an advanced CMOS analog switch fabricated in Sub-micron silicon gate CMOS technology. The part also features guaranteed BreakPDF
ET5228AThe ET5228A is an advanced CMOS analog switch fabricated in Sub−micron silicon gate CMOS technology. The part also features guaranteed BreakLow RON: typical 0.4Ω @ VCC =4.3VPDF
ET5228HThe ET5228H is an advanced CMOS analog switch fabricated in Sub−micron silicon gate CMOS technology. The part also features guaranteed BreakLow RON is typical 0.6Ω @ VCC =3.3VPDF
ET5228HAMThe ET5228HAM is an advanced CMOS analog switch fabricated in Sub−micron silicon gate CMOS technology. The part also features guaranteed BrSpecs
ET5229HThe ET5229H is an advanced CMOS analog switch fabricated in Sub−micron silicon gate CMOS technology. The part also features guaranteed BreakLow RON is typical 0.6Ω @ VCC =3.3VPDF
ET601BFBThe ET601 series products are high-performance three-wire switch chips designed for electronic atomization devices. ET601 supports the AnyPaHigh-sensitivity microphone head detectionPDF
ET601BHBThe ET601 series products are high-performance three-wire switch chips designed for electronic atomization devices. ET601 supports the AnyPaHigh-sensitivity microphone head detectionPDF
ET601RHBThe ET601 series products are high-performance three-wire switch chips designed for electronic atomization devices. ET601 supports the AnyPaHigh-sensitivity microphone head detectionPDF
ET602The ET602 series products are novel switch microphone chips designed for electronic atomization devices. Their standout feature is the PowerSupports AnyPa™ sensitivity settingPDF
ET603BFBThe ET603 series products are high-performance three-wire switch chips designed for electronic atomization devices. ET603 is a traditional pHigh-sensitivity microphone head detectionPDF
ET603BHBThe ET603 series products are high-performance three-wire switch chips designed for electronic atomization devices. ET603 is a traditional pHigh-sensitivity microphone head detectionPDF
ET604The ET604 series products are novel switch microphone chips designed for electronic atomization devices. Their standout feature is the PowerSupports PowerFree™ operation mode without power supplyPDF
ET6408The ET6408 is an 8-bit universal I/O port expansion IC. It provides up to 8 I/O port expansion functions for MCU through I2C-bus /SM bus intTSSOP16; QFN16; QFN16LPDF
ET6416The ET6416 is a 16-bit I²C-bus I/O expander with bidirectional voltage translation (1.65V-5.5V), 5V tolerant I/Os, ultra-low power consumptiVFBGA24(3mm × 3mm × 0.85mm)PDF
ET64B16The ET64B16 is a 16-bit I²C-bus I/O expander with wide voltage range (1.65V-5.5V), 5V tolerant I/Os, ultra-low power consumption, and prograTSSOP24 (7.8mm x 4.4mm )PDF
ET64C16The ET64C16 is a 16-bit I²C I/O expander with bidirectional voltage translation (1.65V-5.5V), ultra-low power consumption, and enhanced addr1.65V to 5.5V Operating VoltagePDF
ET7222The ET7222 is a 2CH single-pole/double-throw (SPDT) switches. Their wide bandwidth and low bit-to-bit skew allow them to pass high-speed difPDF
ET7227The ET7227 is a double-pole/double-throw (DPDT) switches. Their wide bandwidth and low bit-to-bit skew allow them to pass high-speed differSpecs
ET7228The ET7228 is a double-pole/double-throw (DPDT) switches. Their wide bandwidth and low bit-to-bit skew allow them to pass high-speed differPDF
ET7229The ET7229 is a double-pole/double-throw (DPDT) switches. Their wide bandwidth and low bit-to-bit skew allow them to pass high-speed differeRON is typically 6.0 Ω @ VCC = 3.3 VPDF
ET7428The ET7428 is an advanced CMOS analog switch fabricated in Sub−micron silicon gate CMOS technology. The part also features guaranteed Break Low RON is typical 1Ω @ VCC =3.3VPDF
ET7429ET7429 is a Hi-Speed (up to 480Mbps) USB dual SPDT switch with over-voltage protection. It operates over a 2.7V to 5.5V supply range with ovOperating Range from 2.7V to 5.5VPDF
ET7460HThe ET7460H is a high voltage, wide range positive and negative signal passing, dual single-pole/single-throw (SPST) analog switch that is dWide Voltage Operation: 2.7V to 5.5VPDF
ET74752The ET74752 is a Hi-Speed USB 2.0(480Mbps) DPDT(Double Pole Double Throw) switch with integrated protection for USB D+ and D-, it can be conUSB 2.0 Hi-speed DPDT SwitchPDF
ET74801ET74801 is a high performance USB Type-C port multimedia switch which supports analog audio headsets. ET74801 allows the sharing of a commonPower Supply of VCC is from 2.7 V to 5.5 VPDF
ET74802ET74802 is a high performance USB Type-C port multimedia switch which supports analog audio headsets. ET74802 allows the sharing of a commonWLCSP25 (1.974mm × 1.974mm)Specs
ET74AVCH1T45The ET74AVCH1T45 is a dual-bit, dual-supply transceiver that enables bidirectional level translation. It features two data input-output portWide Supply Voltage Range: VCC(A): 0.8V to 3.6V VCC(B): 0.8V to 3.6VPDF
ET74AVCH2T45The ET74AVCH2T45 is a dual-bit, dual-supply transceiver that enables bidirectional level translation. It features two data input-output portWide Supply Voltage Range: VCC(A): 0.8V to 3.6V VCC(B): 0.8V to 3.6VPDF
ET74AVCH4T245The ET74AVCH4T245 is an 4-bit, dual supply transceiver that enables bidirectional level translation. It features two 4-bit input-output portTSSOP16 (4.4mm × 5mm); QFN16 (2.5mm × 3.5mm); QFN16 (1.8mm × 2.6mm); SOP16 (9.9mPDF
ET74AVCH4T774The ET74AVCH4T774Y is a 4-bit, dual supply transceiver that enables bidirectional level translation. It features two 8-bit input-output porQFN16L (2.6mm x 1.8mm)Specs
ET74AVCH8T245The ET74AVCH8T245 is an 8-bit, dual supply transceiver that enables bidirectional level translation. It features two 8-bit input-output portWide Supply Voltage Range: VCC(A): 0.8V to 3.6V VCC(B): 0.8V to 3.6VPDF
ET74HC4851The ET74HC4851 is an 8-channel CMOS analog signal multiplexer. It operates from 2.5V to 5.5V single power supply and all digital inputs supSingle Supply Voltage Range: 2.5V to 5.5VSpecs
ET74HC4852The ET74HC4852 is a CMOS analog multiplexer which consists of two 4-channel multiplexers. It operates from 2.5V to 5.5V single power supplySingle Supply Voltage Range: 2.5V to 5.5VSpecs
ET74LVCH1T45The ET74LVCH1T45 is a dual-bit, dual-supply transceiver that enables bidirectional level translation. It features two data input-output porBus Hold on Data InputsSpecs
ET74LVCH2T45The ET74LVCH2T45 is a dual-bit, dual-supply transceiver that enables bidirectional level translation. It features two data input-output porBus Hold on Data InputsSpecs
ET74LVCH4T245The ET74LVCH4T245 is a 4-bit, dual supply transceiver that enables bidirectional level translation. It features two 4-bit input-output portWide Supply Voltage Range:Specs
ET74LVCH8T2458-Bit Dual Supply Translating Transceiver with Configurable Voltage Translation; 3-StateQFN24 (3.50mm × 5.50mm); QFN24 (2.0mm × 4.0mm); TSSOP24 (7.80mm × 4.40mm)PDF
ET7WB66MThe ET7WB66M are low ON-resistance, high-speed CMOS 2-bit bus switches. These bus switches allow connections or disconnections to be made wVSSOP8Specs
ET8202The ET8202 is a low power comparator that typically consumes less than 10μA supply current. Guaranteed to operate at a low voltage of 1.5V aLow Supply Current is 7μA TypicalPDF
ET85001D/E/EA/SC/SCA/MET85001 is a low-voltage (1.8V to 5.5V) operational amplifier with rail-to-rail input and output swing capabilities. ET85001 provides a cost1.8V to 5.5V Supply VoltagePDF
ET85002M/UET85002 is a low-voltage (1.8V to 5.5V) operational amplifier with rail-to-rail input and output swing capabilities. ET85002 provides a cost1.8V to 5.5V Supply VoltagePDF
ET85201ET85201 is a single low-voltage (1.8 V to 5.5 V) operational amplifier (op amp) with very low noise and wide bandwidth capabilities while op1.8V to 5.5V Supply VoltagePDF
ET85202MET85202 is a dual low-voltage (1.8 V to 5.5 V) operational amplifier (op amp) with very low noise and wide bandwidth capabilities while operSOP8; DFN8(2×2)PDF
ET852S1MAETEK ET852S1MA Switches Integrated CircuitSOP8Specs
ET852SXXXhe ET852SXXX series consists of single and dual-channel amplifiers with extremely high precision, featuring ultra-low offset voltage, temperUltra low voltage noise density:2nV/√Hz(1kHz)Specs
ET85302M/U/YET85302 uses auto calibration technique to simultaneously provide low offset voltage (15 μV, max) and near-zero drift over time and temperat1.8V to 5.5V Supply VoltagePDF
ET85501E/EA/MET85501 is a high-precision amplifiers featuring rail-to-rail input and output swings respectively and has ultra low offset, drift, and biasSOP8; SOT23-5PDF
ET85502M/UET85502 is perfectly suited for applications where error sources cannot be tolerated, since the offset voltage is only 1μV and the drift is Low offset voltage : 1 μVPDF
ET85522MThe ET85522M precision operational amplifiers are ultra-low noise, fast-settling, zero-drift, zero-crossover devices that provide rail-to-raSOP8PDF
ET85601E/EA/SC/SCAET85601 is a single low-voltage (1.8V to 5.5V) operational amplifier (op amp) with rail-to-rail input and output swing capabilities. The devRail-to-rail input and outputPDF
ET85602M/U/E/Y1/Y2ET85602 is a dual low-voltage (1.8V to 5.5V) operational amplifier (op amp) with rail-to-rail input and output swing capabilities. The devicLow input offset voltage: ±0.3 mVPDF
ET85604M/V/YET85604 is a quad low-voltage (1.8V to 5.5V) operational amplifier (op amp) with rail-to-rail input and output swing capabilities. The devicLow input offset voltage: ±0.3 mVPDF
ET856S1MAETEK ET856S1MA Switches Integrated CircuitSOP8Specs
ET856SXXXThe ET856SXXX series consists of single and dual-channel amplifiers with extremely high precision, featuring ultra-low offset voltage, tempeUltra low voltage noise density:4nV/√HzSpecs
ET85702M/U/Y1ET85702 offers low voltage operation, negative-rail input, rail-to-rail output, as well as excellent speed/power consumption ratio, providinHigh Gain Bandwidth:250 MHzPDF
ET85704VET85704 offers low voltage operation, negative-rail input, rail-to-rail output, as well as excellent speed/power consumption ratio, providinHigh Gain Bandwidth:250 MHzPDF
ET85902MET85902 is a low-noise dual operational amplifier with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). The Supply Range: 2.7 V ~ 36 VPDF
ET85904MET85904 is a low-noise quad operational amplifier with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). The Supply Range: 2.7 V ~ 36 VPDF
ET85932M/UThe ET85932M is a newest high supply voltage amplifier with low offset, low power, and stable high-frequency response. It achieve excellent SOP8PDF
ET85934MThe ET85934M is a newest high supply voltage amplifier with low offset, low power, and stable high-frequency response. It achieve excellent Supply Voltage: 3V to 36VSpecs
ET85B11E/EAThe ET85B1X series amplifiers are the industry-standard operational amplifiers which include single-channel (ET85B11) and dual-channel (ET8Wide Supply: ±1.5 V to ±18 V, 3.0 V to 36 VSpecs
ET85B12MThe ET85B1X series amplifiers are the industry-standard operational amplifiers which include single-channel (ET85B11) and dual-channel (ET85Wide Supply: ±1.5 V to ±18 V, 3.0 V to 36 VSpecs
ET85B14M/VThe ET85B1X series amplifiers are the industry-standard operational amplifiers which include single-channel (ET85B11) and dual-channel (ET85Wide Supply: ±1.5 V to ±18 V, 3.0 V to 36 VSpecs
ET8901M/VThe ET8901 is a quad channel comparator with open-drain output that feature 250μA quiescent current, a wide range of supply voltages from 2.TSSOP14; SOP14PDF
ET8903M/UThe ET8903 is a dual channel comparator with open-drain output that feature 250μA quiescent current, a wide range of supply voltages from 2.SOP8; MSOP8PDF
ET9306Dual Bidirectional I2C Bus and SMBus Voltage-Level TrasnslatorDFN8 (1.4mm × 1mm); SOP8 (3.9mm × 4.9mm); VSSOP8 (2.0mm × 2.3mm); MSOP8 (3.0mm ×Specs
ET9818XXXXMicro-Power Voltage DetectorsSOT23-3(2.92mm×2.8mm); SSOT23-3(2.92mm×2.4mm); DFN4(1mm×1mm)Specs
ET9819ET9819 is a timer reset IC that supplies a reboot signal to the system when “L”voltage is input into the SW1,SW2 pins for a set time (rebootDFN6 (1mm × 1mm)Specs
ET9820ET9820 is a timer reset IC that supplies a reboot signal to the system when...Input Voltage Range: 2.5V ~ 5.5VSpecs
ET9821XThe ET9821 is a micro-power logic IC for TWS case status detection.Supply Voltage Range: 2.4 ~ 5.5VSpecs
ET9823AThe ET9823A is a micro-power voltage detector IC used to monitor the multiple power supplies in microprocessor or logic system. It has high-Internal Fixed ThresholdSpecs
ET9825XXXXThe ET9825A29L is a micro-power voltage detector supervising the power supply voltage level for microprocessors (μP) or digital systems. It SSOT23-3Specs
ETF0102The ETF0102 supports bidirectional voltage translation without the need for DIR pin which minimizes system effort. The ETF0102 supports 5V tPDF
ETF01044 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull ApplicationsTSSOP14 (5.0mm × 4.4mm); QFN12 (2.0mm × 1.7mm); QFN12 (1.6mm × 1.6mm)Specs
ETQ5228MThe ETQ5228M is an advanced CMOS analog switch fabricated in Sub−micron silicon gate CMOS technology. The part also features guaranteed BreaLow RON is typical 0.4Ω @ VCC =4.3VPDF
ETQ64B16The ETQ64B16 is an AEC-Q100 Grade 1 certified 16-bit I²C I/O expander with wide voltage range (1.65V-5.5V) and automotive temperature range TSSOP24 (7.8mm x 4.4mm )PDF
ETQ64C16The ET64C16YAM is a 16-bit general purpose I/O expander that provides remote I/O expansion for most micro-controller families via the I2C-bu16 bit I2C-BUS to parallel port expanderSpecs
ETQ74AVC4T774The ETQ74AVC4T774 is a 4-bit, dual supply transceiver that enables bidirectional level translation. It features two 8-bit input-output portsWide Supply Voltage Range: VCC(A): 0.8 V to 3.6 V VCC(B): 0.8 V to 3.6 VPDF
ETQ74AVCH4T245The ETQ74AVCH4T245 is a 4-bit, dual supply transceiver that enables bidirectional level translation.Wide Supply Voltage RangeSpecs
ETQ85601ETQ85601 is a single low-voltage (1.8 V to 5.5 V) operational amplifier (op amp) with rail-to-rail input- and output- swing capabilities.Rail-to-rail input and outputSpecs
ETQ85602METQ85602 is a dual low-voltage (1.8 V to 5.5 V) operational amplifier (op amp) with rail-to-rail input and output swing capabilities. The deLow input offset voltage: ±0.3 mVPDF
ETQ85604METQ85604 is a quad low-voltage (1.8 V to 5.5 V) operational amplifier (op amp) with rail-to-rail input and output swing capabilities. The deLow input offset voltage: ±0.3 mVPDF
ETQF0102The ETQF0102 supports bidirectional voltage translation without the need for DIR pin which minimizes system effort. The ETQF0102 supports 5VTSSOP8 (2.95mm × 4.4mm); VSSOP8 (2.0mm × 2.3mm)Specs
ETS0104The ETS0104 is a 4-bit bidirectional level translator in which the input and output ports are switched automatically without direction contFOWLP12 (1.87mm × 1.37mm × 0.5pitch); FOWLP12 (1.91mm × 1.41mm × 0.4pitch); QFN1Specs
ETS0108The ETS0108 is an 8-bit bidirectional level translator in which the input and output ports are switched automatically without direction conSpecs
LM358MLM358 is the industry-standard operational amplifier which include dual -channel of high-voltage(36 V) op-amp. These devices provide outstanWide Supply: ±1.5 V to ±18 V(3.0 V to 36 V)PDF
LMV331EThe LM331 is a single channel comparator with open-drain output offer the ultimate combination of high speed (100 ns propagation delay) and 1.8V to 5.5V Supply VoltagePDF
LMV393M/UThe LM393 is a dual channel comparator with open-drain output offer the ultimate combination of high speed (100 ns propagation delay) and ve1.8V to 5.5V Supply VoltagePDF