ET9306
General Description
The ET9306 device is a dual bidirectional I2C and SMBus voltage-level translator with an enable (EN) input, and is operational from 0.95V to 3.3V VREF1 and 1.8V to 5.0V VREF2. The NCA9306 device allows bidirectional voltage translations between 0.95V and 5V, without the use of a direction pin. The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is ON, and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off, and a high-impedance state exists between ports.
Features
- 2 Bit bidirectional translator for SDA and SCL lines in mixed-mode I2C Applications
- I2C and SMBus Compatible
- Allows Voltage-level Translation Between
- Provides Bidirectional Voltage Translation with no Direction Pin
- Open-drain I2C I/O ports (SCL1, SDA1, SCL2, and SDA2)
- 5V Tolerant I2C I/O Ports to Support Mixed-mode Signal Operation
- High-impedance SCL1, SDA1, SCL2, and SDA2 pins for EN = Low
- I3C compatible (12.5MHz Supported)
- ESD Protection Complies with JESD22 Standard
- Latch-up Performance Exceeds ±100mA per JEDEC JESD78F
- Package: DFN8 (1.4mm × 1mm); SOP8 (3.9mm × 4.9mm); VSSOP8 (2.0mm × 2.3mm); MSOP8 (3.0mm × 3.0mm)