ETQ64C16

Email Inquiry IconContact

General Description

The ETQ64C16 is a 16-bit general purpose I/O expander that provides remote I/O expansion for most micro-controller families via the I2C-bus interface.ET64C16YAM provides a simple solution for I/O port expansion, which can be realized with little interconnection. In addition to providing a set of flexible GPIO ports, it also supports the level conversion between different voltage devices, so that it can be flexibly applied in multi voltage mixed signal environment.

ET64C16YAM has four pairs of 8-bits registers: configuration register, input register, output register and polarity reversal register. When power-on, all I/O ports are configured to input status. By configuring the I/O ports’ configuration register, the system can determine the input and output status of each I/O port. Each input or output data is stored in the corresponding input or output register. The polarity of input registers can be flipped by configuring polarity reversal registers to save external logic gates. When any input state is different from its corresponding input register state, the ET64C16YAM open drain interrupt (INT) output is active to indicate to the host that the input state has changed.

The INT can be connected to the interrupt input of the micro-controller. By sending the interrupt signal, the micro-controller port is informed that there is data entering, instead of passing through I2C BUS.

The Port P output of ET64C16YAM can provide 25mA perfusion current, which can directly drive LED.

The hardware address pin (A2、A1、A0) can be used to program and change the I2C BUS address.

Features

  • 16 bit I2C-BUS to parallel port expander
  • Operating power supply voltage range of 1.65 V to 5.5 V
  • Low standby current consumption
  • -- 1.5uA typical at VDD=5V
  • -- 1.0uA typical at VDD=3.3V
  • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and
  • SDA inputs
  • -- VHYS = 0.15 V (typical) at VDD=1.8 V
  • -- VHYS = 0.20 V (typical) at VDD=2.5 V
  • -- VHYS = 0.26 V (typical) at VDD=3.3 V
  • -- VHYS = 0.45 V (typical) at VDD=5.0 V
  • 5 V tolerant I/O ports
  • Open-drain active LOW interrupt output (INT)
  • 400 kHz Fast-mode I2C-BUS
  • Input/Output Configuration register
  • Polarity Inversion register
  • Internal power-on reset
  • Power-up with all channels configured as inputs
  • No glitch on power-up
  • Noise filter on SCL/SDA inputs
  • Outputs with 25 mA drive maximum capability for directly driving LEDs
  • Latch-up performance exceeds 100 mA
  • AEC-Q100 Grand 1 Qualified
  • -- Ambient temperature range -40℃ to 125℃
  • -- HBM ESD protection exceeds ±2000 V
  • -- CDM ESD protection exceeds ±1000 V
  • -- MSL 3

Technical Documentation

Type Title Format Date
Datasheet ET64C16YAM PDF 2026-03-05

Free sample application, Provide various solutions

Samples