EN
ET20174
Contact
Description générale
The ET20174 is a current limit N-Channel MOSFET power switch. It is designed to protect circuitry on the output from transients on the input. It also protects the input from undesired shorts and transients coming from the output.
The current limit magnitude is controlled by an external resistor from ILIMIT to GND. It is fixed 0.73A when ILIMIT is floating. Programmable soft-start time controls the slew rate of the output voltage during the start-up time. It can be controlled by the DV/DT pin setting.
The ET20174 offer a GATE drive signal connected to an external N-Channel MOSFET gate to block current flowing from the output to the input when the IC is disable, power off or thermal shutdown.
The output voltage will be clamped at 15V when the input voltage exceeds 15V.
Spécifications
Échantillon
Caractéristiques
- VIN Operating Range: 4.5V to 13.8V, VIN_MAX=20V
- Fixed Over-Voltage Clamp: 15V
- Fault Response After OTP: Latched
- Programmable Current Limit and Soft-Start Time
- Short-Circuit Protection
- Typical RON: 31mΩ From Input to Output Power Path
- Very Low Quiescent Current: 110μA (Typ)
- Reverse-Blocking MOSFET Driver
- Over-Current Protection
- Internal Thermal Shutdown Protection
- ESD Human Body Model Protected：All pins ± 2KV Pass
- Package : DFN10 (3mm × 3mm)
Documentation technique
| Type | Titre | Format | Date |
|---|---|---|---|
| Fiche technique | ET20174 | PDF (EN ANGLAIS) | 2026-01-30 |
