EN
ET20173H
Liên hệ
Mô tả chung
The ET20173H is a current limit N-Channel MOSFET power switch. It is designed to protect circuitry on the output from transients on the input. It also protects the input from undesired shorts and transients coming from the output.
The current limit magnitude is controlled by an external resistor from ILIMIT to GND. It is fixed 0.73A when ILIMIT is floating. Programmable soft-start time controls the slew rate of the output voltage during the start-up time. It can be controlled by the DV/DT pin setting.
The ET20173H offer a GATE drive signal connected to an external N-Channel MOSFET gate to block current flowing from the output to the input when the IC is disable, power off or thermal shutdown.
The output voltage will be clamped at 6.1V when the input voltage exceeds 6.1V.
Thông số kỹ thuật
Mẫu
Tính năng
- VIN Operating Range: 4.5V to 5.5V, VIN_MAX=20V
- Fixed Over-Voltage Clamp: 6.1V
- Fault Response After OTP: Auto Retry
- Programmable Current Limit and Soft-Start Time
- Short-Circuit Protection
- Typical RON: 31mΩ From Input to Output Power Path
- Very Low Quiescent Current: 100μA (Typ)
- Reverse-Blocking MOSFET Driver
- Over-Current Protection
- Internal Thermal Shutdown Protection
- ESD Human Body Model Protected：All pins ± 2KV Pass
- Package : DFN10 (3mm × 3mm)
