EN
ET5C001Y1B
Liên hệ
Mô tả chung
The ET5C001Y1B is a low-noise (6µVRMS), low- dropout voltage regulator (LDO) capable of sourcing a 3A load with low dropout. The output voltages are fully user-adjustable using a printed circuit board (PCB) layout without the need of external resistors, thus reducing overall component count. For higher output voltage applications, the device achieves output voltages up to 5V with the use of external resistors. The device supports very low input voltages (down to 1.1V) with the use of an additional BIAS rail.
With very high accuracy, remote sensing, and soft-start capabilities to reduce inrush current, the ET5C001Y1B is ideal for powering high-current, low-voltage devices such as high-end microprocessors and field-programmable gate arrays.
Thông số kỹ thuật
Mẫu
Tính năng
- Ultra-low Dropout: 260mV Maximum at 3A
- Output Voltage Noise: 6µVRMS
- Power-Supply Ripple Rejection: 40dB at 1MHz
- Input Voltage Range: Without BIAS:1.4V to 5.5V; With BIAS:1.1V to 5.5V
- Two Output Voltage Modes
- 1.0% Accuracy Over Line, Load, and Temperature
- Programmable Soft-Start Output
- Power-Good (PG) Output
- Built-in Under Voltage Lockout (UVLO)
- Built-in Internal Current Limit
- Package : QFN20 (3.5×3.5)
Tài liệu kỹ thuật
| Loại | Tiêu đề | Định dạng | Ngày |
|---|---|---|---|
| Bảng dữ liệu | ET5C001Y1B | Tệp PDF | 2026-01-22 |
